Skip to main content

Архивы: Продукция

FOSSER Garant Super 20W-50

Опубликовал Lukas Vladi, .

Universal high-performance engine oil

Properties

FOSSER Garant Super is a mineral high-performance universal engine oil of viscosity class SAE 20W-50. Base oils produced with the latest refinery technology and carefully selected innovative additives guarantee that the product meets the highest requirements. Among its most outstanding properties are the excellent shear stability at high temperatures and exceptional wear protection under all operating conditions. Cleaning additives prevent deposits, keep pistons and valves clean and protect the engine against black sludge. Clean engines and low friction reduce energy loss in the engine and minimise servicing costs.

Use instructions

FOSSER Garant Super 20W-50 is a high-performance engine oil for universal use, even under heavy-duty conditions. It is recommended for passenger car petrol and diesel engines with or without turbocharging. It meets the stringent requirements of modern fuel-efficient engines and the latest emissions standards with a generous safety margin.

Specifications: ACEA A3/B4, API SJ/CF

TYPICAL VALUESMETHODUNITFOSSER Garant Super 20W-50 
Density at 15°CDIN 51 757kg/m³885
Viscosity at 40°CDIN 51 562mm²/s157
Viscosity at 100°CDIN 51 562mm²/s18,4
Viscosity index (VI)DIN ISO 2909—132
Viscosity at -15°CDIN 51 377mPa.s5960
Pour pointDIN ISO 3016°C-36
COC flash pointDIN ISO 2592°C236
TBNDIN ISO 3771mg KOH/g8,7

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER Garant Super plus 20W-50

Опубликовал Lukas Vladi, .

Universal high-performance engine oil

Properties

FOSSER Garant Super plus is an all-season multigrade engine oil. Exhaust gas turbocharging and charge air cooling place considerably higher mechanical and thermal demands on engine oils. These tougher operating conditions are safely mastered even with extended oil residence times. A reliable cold start at low ambient temperatures and full lubricity at high operating temperatures are ensured. The use of shear-stable active ingredients ensures compliance with SAE class 20W-50 throughout the entire oil change interval.

Use instructions

FOSSER Garant Super plus 20W-50 is used in highly stressed commercial vehicle and passenger car diesel engines, as well as in petrol engines. Engine oils in this performance category are recommended for extended oil change intervals.

  • Specifications: ACEA E7, A3/B4 • API CI-4/SL • JASO DH-1
  • Recommendations*: MB 229.1, DTFR 15B110 (228.3), MAN 3275-1, Volvo VDS-2, Cummins CES 20076/77/78, Deutz DQC II-10
TYPICAL VALUESMETHODUNITFOSSER Garant Super plus 20W-50
Density at 15°CDIN EN ISO 12185kg/m³882
Viscosity at 40°CDIN 51 562mm²/s142
Viscosity at 100°CDIN 51 562mm²/s17,8
Viscosity index (VI)DIN ISO 2909—139
Viscosity at -15°CDIN 51 377mPa.s9500
COC flash pointDIN ISO 2592°C>210
Pour pointDIN ISO 3016°C-36
Total base numberDIN ISO 3771mg KOH/g11

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER Monograde

Опубликовал Lukas Vladi, .

High-performance single-grade engine oil

Properties

  • High-performance single-grade engine oil
  • High viscosity index
  • High dirt dispensing capacity
  • Stable lubricant film
  • Excellent cleaning capacity
  • High thermal stability
  • Excellent wear and corrosion protection

Use instructions

FOSSER Monograde is recommended for use in both diesel and petrol engines with or without turbocharger, such as:

  • Commercial diesel vehicle engines
  • Stationary diesel engines
  • Construction machines and agricultural units In addition, the product can be used in hydraulic systems, hydraulic clutches, gearboxes, torque converters and retarders for which the manufacturer prescribes the use of a high-performance single-grade engine oil.
  • Specifications: ACEA E2, API SJ/ CF-4
  • Recommendations*: MB-227.0, MAN M 270, Allison C-4, Caterpillar TO-2, MIL-L-2104 E, MIL-L-46152 E, MTU oil type 1
TYPICAL VALUESMETHODUNITFOSSER Monograde
SAE classDIN 51 511—10W20W-203040
Density at 15°CDIN 51 757g/cm30,8830,8880,8950,898
Viscosity at -15°CDIN 51 377mPa s—2200——
Viscosity at -25°CDIN 51 377mPa s6000———
Viscosity at 40°CDIN 51 562mm2/s3957103152
Viscosity at 100°CDIN 51 562mm2/s6,57,811,515
Viscosity index (VI)DIN ISO 2909—1121019597
COC flash pointDIN ISO 2592°C212220235240
Pour pointDIN ISO 3016°C-24-22-18-15
Total base numberDIN ISO 3771mgKOH/g9,79,79,79,7
Sulphated ashDIN 51 575g/100 g1,31,31,31,3

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER Monograde SAE 50

Опубликовал Lukas Vladi, .

High-performance Single Grade Engine Oil

Properties

  • High-performance single-range engine oil
  • High viscosity index
  • High dirt holding capacity
  • Stable lubrication film
  • Excellent cleaning performance
  • High thermal stability
  • Excellent wear and corrosion protection

Use instructions

FOSSER Monograde is suitable for use in diesel and ottomotors with and without turbocharging, such as:

  • Commercial vehicle diesel engines
  • Stationary diesel engines
  • Construction machinery and agricultural aggregates It is also used in hydraulic systems, hydraulic clutches, gearboxes, torque converters and retarders if such type of engine oil is prescribed by the manufacturer.
  • Specifications: ACEA E2, API SJ/ CF-4
  • Recommendations*: MB-227.0, MAN M 270, Allison C-4, Caterpillar TO-2, MIL-L-2104 E, MIL-L-46152 E, MTU Öltyp 1
Typical ValuesMethodUnit Fosser SAE Monograde 50
Density at 15°CDIN 51 757kg/m³899
Density at 40°CDIN 51 562mm²/s239
Density at 100°CDIN 51 562mm²/s19,5
Viscosity index (VI)DIN ISO 2909—93
PourpointDIN ISO 3016°C-21
Flash point COCDIN ISO 2592°C290
Base numberDIN ISO 3771mg KOH/g11,8
Sulfated ashDIN 51 575g/100g1,6

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER Turbo Ultra LA 5W-30

Опубликовал Lukas Vladi, .

Synthetic High-Performance Low-Friction Engine Oil

Properties

FOSSER Turbo Ultra LA 5W-30 is a HC-synthetic high-performance low-friction engine oil for commercial vehicles. The oil is a low-SAPS product with significantly reduced sulphated ash, phosphorus and sulphur content. Thanks to the use of high-performance additives, the oil offers excellent oxidation and high-temperature stability. The good dispersing properties of the product prevent deposits in the engine and on pistons that could otherwise impair the performance of the engine. At very low ambient temperatures, FOSSER Turbo Ultra LA 5W-30 guarantees reliable cold start and fast oil supply to all lube points. It is able to cope with all extreme conditions and to reduce friction loss and wear. It also improves the efficiency of engines as both oil and fuel consumption is reduced and the service life of the engine is prolonged.

Use instructions

FOSSER Turbo Ultra LA 5W-30 has been specially developed for the economic supply of emission-optimised engines with exhaust gas aftertreatment systems (Euro IV and V). The product is also recommended for use in CNG engines. FOSSER Turbo Ultra LA 5W-30 is designed for year-round use under any operating conditions and ensures that exhaust gas aftertreatment systems can work efficiently over significantly prolonged oil change intervals.

  • Specifications: ACEA E6/E7/E9, API CK-4/SN
  • Recommendations*: Caterpilar ECF-3,Cummins CES 20086, DAF Extende Drain, DDC 93K222, Deutz DQC IV-10 LA, Deutz DQC IV-18 LA, Mack EOS-4.5, MAN M 3677/3477/3277/3271-1, Iveco, DTFR 15C110 (228.51), DTFR 15C100 (228.31), MB 226.9, MTU Type 3.1, Renault VI RLD-3/RXD/RGD, Scania LDF-4, Voith Retarder Class B, Volvo CNG, Volvo VDS-4.5
TYPICAL VALUESMETHODUNITFOSSER Turbo Ultra LA 5W-30
Density at 15°CDIN EN ISO 12185 kg/m³851
Viscosity at 40°CDIN 51 562mm²/s71,85
Viscosity at 100°CDIN 51 562mm²/s12,29
Viscosity index (VI)DIN ISO 2909—170
COC flash pointDIN ISO 2592°C236
Pour pointDIN ISO 3016°C-42
TBNDIN ISO 3771mg KOH/g10
sulfated ashDIN 51 575mass. %0,89

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER | моторное масло из Германии

Штаб-квартира

Duran Lubricants & Chemicals GmbH
Rodderheide 3-7
33824 Werther (Westf.)
Germany

Контакт

FOSSER

© FOSSER. Все права защищены.
Cookie-Einstellungen