FOSSER oils
FOSSER oils made in Germany
Autor: Fosser
FOSSER Compressor Oil VDL 46/68
Compressor Oil
Properties
FOSSER Compressor Oil VDL are a top-quality hydraulic fluids made from mineral base oils and highly refined core blends.
Key advantages at a glance:
- Excellent wear protection.
- Outstanding oxidation resistance, resulting in reduced coking.
- Good adhesion.
- Outstanding ageing resistance.
- High thermal stability.
- Excellent demulsification capacity.
- Unrivalled viscosity-temperature behaviour.
Use instructions
FOSSER Compressor Oil VDL compressor oil is recommended for use in stationary and mobile compressors with end temperatures of up to 220°C. It is also suitable for use in anti-friction and plain bearings in oil recirculation systems. FOSSER VDL compressor oils meet the highest requirements of modern compressor units and are classified as VDL oils according to DIN 51 506. They exceed by far the specifications for VCL and VBL products. For use in compressors, observe safety regulation VBG 16.
Observe manufacturer instructions!
Specifications: DIN 51 506 VDL
| TYPISCHE KENNWERTE | METHODEN | EINHEITEN | 46 | 68 |
| Density at 15°C | DIN EN ISO 12185 | kg/m³ | 862 | 842 |
| Viskosity at 40°C | DIN 51 562 | mm²/s | 45,5 | – |
| Viskosity at 100°C | DIN 51 562 | mm²/s | 7 | 11,4 |
| Viskosity index (VI) | DIN ISO 2609 | – | 111 | 166 |
| Pourpoint | ASTM D 7346 | °C | -27 | -63 |
The stated values may vary within the usual commercial range.
* meets the requirements of the OEM manufacturer.
FOSSER Compressor Oil VDL 46/68
Компрессорное масло
Cвойства
FOSSER Compressor Oil VDL – высококачественные смазочные масла на минеральной основе из сырья высокой степени очистки. Отличаются следующими свойствами:
- Наилучшая защита от износа.
- Превосходная устойчивость к окислению – пониженная склонность к нагарообразованию.
- Хорошая адгезионная способность.
- Отличная устойчивость к старению.
- Высокая термостойкость.
- Очень хорошие свойства водоотделения.
- Замечательные вязкостно-температурные характеристики.
FOSSER Compressor Oil VDL – Компрессорное масломожет применяться в стационарных и переносных воздушных компрессорах с температурами в конце сжатия до 220°C. Ещё одна область применения – подшипники качения и скольжения в системах циркуляции масла. Компрессорные масла FOSSER VDL соответствуют высочайшим требованиям современных компрессорных установок и относятся к группе VDL согласно DIN 51 506. Требования для VCL и VBL превосходятся с большим запасом. При работе компрессоров следует соблюдать инструкцию по технике безопасности VBG 16.
Соблюдать инструкции производителя!
Указания по применению
Спецификации: DIN 51 506 VDL
| ТИПОВЫЕ ХАРАКТЕРИСТИКИ | МЕТОДЫ | ЕДИНИЦЫ | 46 | 68 |
| Dichte bei 15°C | DINENISO12185 | kg/m³ | 862 | 842 |
| Viskosität bei 40°C | DIN 51 562 | mm²/s | 45,5 | – |
| Viskosität bei 100°C | DIN 51 562 | mm²/s | 7 | 11,4 |
| Viskositätsindex (VI) | DIN ISO 2609 | – | 111 | 166 |
| Pourpoint | ASTM D 7346 | °C | -27 | -63 |
FOSSER Mega LL 10W- 40
Properties
FOSSER Mega LLis a mineral high-performance universal engine oil of viscosity class SAE 10W-40. Base oils produced with the latest refinery technology and carefully selected innovative additives guarantee that the product meets the highest requirements. Among its most outstanding properties are the excellent shear stability at high temperatures and exceptional wear protection under all operating conditions. Cleaning additives prevent deposits, keep pistons and valves clean and protect the engine against black sludge. Clean engines and low friction reduce energy loss in the engine and minimise servicing costs.
Use instructions
FOSSER Mega LL is a high-performance engine oil designed for universal use, even under heavy-duty conditions. It is recommended for passenger car petrol and diesel engines with or without turbocharging. It meets the stringent requirements of modern fuel-efficient engines and the latest emissions standards with a generous safety margin.
- Specifications: ACEA A3/B3/B4 • API SL/CF
- Recommendations*: MB 229.1 • VW-Standard 505.00
| TYPICAL VALUES | METHOD | UNIT | FOSSER Mega LL |
| SAE Class | DIN 51 511 | – | 10W-40 |
| Density at 15°C | DIN 51 757 | kg/m³ | 861 |
| Viscosity at 40°C | DIN 51 562 | mm²/s | 92,3 |
| Viscosity at 100°C | DIN 51 562 | mm²/s | 14,2 |
| Viscosity Index (VI) | DIN ISO 2909 | – | 158 |
| Pour point | DIN ISO 3016 | °C | -36 |
| Flash point COC | DIN ISO 2592 | °C | >200 |
The stated values may vary within the usual commercial range.
* meets the requirements of the OEM manufacturer.
