FOSSER Screenclean Summer Concentrate1:100 consists of a mixture of anionic
surfactants, perfumes and excipients. Fosser Screenclean Summer Concentrate
1:100 ensures streak-free visibility in rain, night and backlight. It
cleans windshields thoroughly from silicone, grease and other dirt. Fosser
Screenclean Summer Concentrate 1:100 is suitable for polycarbonate
diffusers and fan nozzles (Temp.>0°C).
Use instructions
When closed, fill the dispensing head by pressing the bottle. Mix the content (25 ml) of the dosing chamber with water andfill the windscreen washer system. 25 ml of the concentrate give 1,25 (1:50) to 2.5 litres of cleaning fluid. If light soiling: 5L (1:200).
FOSSER Screenclean Winter Concentrate protects the windscreen washer system against freezing and provides good view due to intense cleaning effect. Easily removes grease and road salt residue without causing damage to rubber parts or paintwork. Because of included insect remover, the product is ideal for year-round use. Suitable for polycarbonate panes and fan nozzles. FOSSER Screenclean Winter Concentrate is free of methanol and as water-miscible liquid with a flash point above 21°C not subject to the regulations of the German Flammable Liquids Regulation VbF.
Ingredients according to EU recommendation:
Alcohols
surfactants
colorants
perfumes
Use instructions
UseFOSSER Screenclean Winter Concentrate and water depending on temperature/ season according to the mixing table and fill the windscreen washer system. Mixing ratio in summer: 50-100 ml concentrate per litre of water. Make sure that the product is well mixed with water. Activate windscreen washer once or twice to rinse the lines to the spray nozzles water-free.
Frost protection approx.
Rate of screenclean concentrate
Rate of water
-30°C
2
1
-20°C
1
1
-10°C
1
2
* meets the requirements of the OEM manufacturer. The stated values may vary within the usual commercial range.
FOSSER Screenclean
Winter -30°C protects the windscreen washer
system against freezing and provides good view due to intense cleaning effect.
Easily removes grease and road salt residue without causing damage to rubber
parts or paintwork. Because of included insect remover, the product is ideal
for year-round use. Suitable for polycarbonate panes and fan nozzles. FOSSER Screenclean Winter -30°C is free
of methanol and as water-miscible liquid with a flash point above 21°C not
subject to the regulations of the German Flammable Liquids Regulation VbF.
Ingredients according to EU recommendation:
Alcohols
surfactants
colorants
perfumes
Use instructions
Use FOSSER Screenclean Winter -30°C depending on temperature/ season according to the mixing table and fill the windscreen washer system. Mixing ratio in summer: 100-200 ml cleaner per litre of water. Make sure that the product is well mixed with water. Activate windscreen washer once or twice to rinse the lines to the spray nozzles water-free.
Frost protection approx.
Proportio of water
Frost resistance until:
1
0
-30°C
2
1
-15°C
1
1
-8°C
* meets the requirements of the OEM manufacturer. The stated values may vary within the usual commercial range.
FOSSER Antifreeze FA 11 is an economical corrosion inhibitor and anti-freeze agent concentrate for radiators in water-cooled vehicles. The product is free of nitrite, amines and phosphates. FOSSER Antifreeze FA 11 provides excellent frost and corrosion protection all year round. The product does not have any negative effect on coolant hoses or cylinder head gaskets. It is available in the colors blue, yellow and green.
Use instructions
FOSSER Antifreeze FA 11, mixed with the correct amount of water, is used as a coolant and thermal transfer fluid in internal combustion engines. The product is suitable for engines made in cast iron, aluminium and a combination of these two metals, and for cooling systems made from aluminium or copper alloys. We recommend maintaining a concentration of 50% (v/v) during all seasons. Observe manufacturer instructions!
FOSSER Antifreeze FA 12 is a radiator corrosion inhibitor and anti-freeze agent based on
ethylene glycol. It is free of any potentially hazardous substances such as
nitrites, amines and phosphates. Thanks to the optimised combination of highly
stable inhibitors based on silicate-free carboxylic acid technology, FOSSER Antifreeze FA 12 offers
excellent protection against corrosion and cavitation and prolongs the coolant
change interval. Other additives prevent deposits and foaming of the coolant. FOSSER Antifreeze FA 12 offers
year-round protection against frost and corrosion during the entire service
life of the engine. The product does not have any negative effect on coolant
hoses or cylinder head gaskets.
Use instructions
FOSSER Antifreeze FA 12, mixed with the correct amount of water, can be used without any restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these two metals, and radiator systems made in aluminium or copper alloys. FOSSER Antifreeze FA 12 is particularly recommended for light-alloy engines where the aluminium must be protected against the effect of increased temperatures. We recommend maintaining a concentration of 50% (v/v) during all seasons. FOSSER Antifreeze FA 12 can be mixed with most coolants based on ethylene glycol. Observe manufacturer instructions!
Recommendations*: MB 325.3, MAN 324 SNF, VW TL 774 D, Ford WSS-M97B44-D, Opel GM 6277M, Opel GM 3420, MTU MTL 5048, John Deere JDM H5, Audi/ Seat/ Skoda TL 774-D/F (FA 12/12+), Renault Trucks 41-01-001/-S Type D, Fiat MAT 3624, Jenbacher TA 1000-0201, MAK A4.05.09.01, Mack 014 GS 17009, Cummins IS series u N14/ CES14603/ CES14439, Mazda MEZ MN 121 D, Komatsu 07.892 (2009), Liebherr MD1-36-130, Deutz DQC CB-14, Caterpillar/ MWM 0199-99-02091/ 11, Case New Holland MAT3624, DAF 74002
Proportion Fosser FA 12
Proportion of water
Frost resistance until:
1
2
-18°C
1
1,5
-24°C
1
1
-36°C
TYPICAL VALUES
METHOD
UNIT
FOSSER Antifreeze FA 12
Density at 20°C
ASTM D 5931
g/cm3
1.113
Reserve alkalinity (pH 5.5)
ASTM D 1121
ml 0.1 n HCl
6,2
Boiling point
ASTM D 1120
°C
>163
pH
ASTM D 1287
–
8.6
COC flash point
DIN EN ISO 2592
°C
>120
Frost protection at 50% (v/v)
ASTM D 1177
°C
-36
Colour
–
–
red
* meets the requirements of the OEM manufacturer. The stated values may vary within the usual commercial range.
