Skip to main content

Product Category: Products

FOSSER Mega Formula 10W-60

Written by Alexander Anselm on .

Semi-synthetic high-performance low-friction engine oil
for passenger cars

1 Liter, 4 Liter, 20 Liter, 60 Liter, 208 Liter

FOSSER Mega Formula 10W-60 is a semi-synthetic high-performance low-friction engine oil that combines the advantages of base oils produced with the latest refinery technology with those of synthetic components. The base oil composition and shear resistant VI enhancers ensure that the product retains its specified viscosity properties during the entire lubrication time.

The ageing process of this engine oil is well managed over the permissible maximum oil change interval. Antioxidants and cleaning additives prevent deposits, keep pistons and valves clean and protect the engine against cold sludge. The low friction loss in the engine significantly reduces fuel consumption and emissions. Low evaporation loss prevents deposits in valves, sludging and laking, so that pistons and piston ring grooves are kept clean.

Use instructions

FOSSER Mega Formula 10W-60 is recommended for use in all petrol and diesel engines in passenger cars, including models with diesel turbochargers and catalytic converters.

  • Specifications: ACEA A3/B4, API SN/CF
  • Recommendation*: MB 229.1, VW-Normen 501.01/505.00
TYPISCHE KENNWERTEMETHODENEINHEITENFOSSER Mega Formula
Density at 15°CDIN 51 757kg/cm³862
Viscosity at 40°CDIN 51 562mm²/s184
Viscosity at 100°CDIN 51 562mm²/s25,8
Viscosity index (VI)DIN ISO 2909–175
Viscosity at -35°CDIN 51 377mPa.s6510
COC flash pointDIN ISO 2592°C222
Pour pointDIN ISO 3016°C– 39
TBNDIN ISO 3771mg KOH/g13,2

* meets the requirements of the OEM manufacturer.                                                                                      

The stated values may vary within the usual commercial range.

FOSSER Premium Longlife 12FE 0w30

FOSSER Premium Longlife 12-FE 0W-30

Written by Lukas Vladi on .

High-performance low-friction engine oil for BMW engines of the latest generation

Properties

FOSSER Premium Longlife 12-FE 0W-30 is a low-ash, fuel-economy engine oil for modern BMW engines. By saving fuel, it helps reduce CO2 emissions. Thanks to the product’s innovative additive technology and its significantly reduced content of ash-producing compounds, the oil provides excellent protection for diesel particle filters against dirt (LOW-SAPS formulation).

FOSSER Premium Longlife 12-FE 0W-30 ensures quick cold starting at low temperatures and protects the engine against corrosion and deposits. The synthetic oil keeps the engine in pristine condition.

Use instructions

FOSSER Premium Longlife 12-FE 0W-30 is only suitable for selected BMW diesel engines from model year 2014 for which it has been approved (all B37 3-cylinder engines, 4-cylinder engines from 2014 and 6-cylinder engines from model year 2013) with no more than 1 turbocharger. The product is also suitable for all BMW petrol engines from model year 2002 produced for the EU market, Norway, Switzerland and Liechtenstein.

  • Specifications: ACEA C2
  • Recommendations*: BMW Longlife 12-FE
TYPICAL VALUESMETHODUNITFOSSER Premium
Longlife 12FE 0W-30
Density at 15°CDIN 51 757kg/m³841
Viscosity at 40°CDIN 51 562mm²/s52,8
Viscosity at 100°CDIN 51 562mm²/s9,8
Viscosity index (VI)DIN ISO 2909–174
Viscosity at -35°CDIN 51 377mPa.s5600
COC flash pointDIN ISO 2592°C-48
Pour pointDIN ISO 3016°C236
TBNDIN ISO 3771mg KOH/g8,2

The stated values may vary within the usual commercial range.
* meets the requirements of the OEM manufacturer.

FOSSER Premium Longlife IV 0w20

FOSSER Premium Longlife IV 0W-20 (Hybrid Approved)

Written by Alexander Anselm on .

Synthetic high-performance low-friction engine oil for VW/Audi engines

Properties

FOSSER Premium Longlife IV 0W-20 is a high-performance low viscosity engine oil for VW engines. Its special formulation guarantees maximum thermal and mechanical stability and has a low tendency to evaporate.

FOSSER Premium Longlife IV 0W-20 provides the highest wear protection and impresses with excellent low-temperature properties. This ensures a fast oil supply at all lubrication points and reduces cold start wear to a minimum. In addition, highly effective dispersing additives prevent deposits on pistons and inlet valves.

Use instructions

FOSSER Premium Longlife IV 0W-20 has been developed for the latest VW and Audi engines where VW specification 508 00 and 509 00 are required.


This product is not backward compatible with VW 504 00/ 507 00 and other VW specifications.

  • Specifications: ACEA C5
  • Approvals: VW-Standards  508.00 / 509.00
  • Recommendations*: VW TL 525 77, Porsche C20, Not compatible with VW 504.00/ 507.00
TYPICAL VALUESMETHODUNITFOSSER Premium
Longlife IV 0W-20
Density at 15°CDIN 51 757kg/m³836
Viscosity at 100°CDIN 51 562mm²/s8.1
Viscosity at -35°C (CCS)DIN 51 562mm²/s3980
Viscosity index (VI)DIN ISO 2909– 174
Pour pointDIN ISO 3016°C-54
Flash pointDIN ISO 2592°C234
TBNDIN ISO 3771mg KOH/g8.0
Colourvisual –green

The stated values may vary within the usual commercial range.
* meets the requirements of the OEM manufacturer.

FOSSER Premium Special F 0W-30

Written by Alexander Anselm on .

HIGH-PERFORMANCE LOW-FRICTION ENGINE OIL FOR PASSENGER CAR ENGINES

Properties

Fosser Special F 0W-30 is synthetic high-performance low-friction oil of the latest generation formulated for modern Ford engines. Its excellent cold start behaviour ensures optimum lubrication during the cold start phase. Special additives provide a self-repairing wear protection layer on start-stop system components, preventing damage from frequent stops and starts typical for rush-hour traffic. Seals and belts are protected. The oil keeps engines exceptionally clean and protects them against excessive wear.
The excellent stability of this product allows for extended oil change intervals, based on car manufacturer recommendations.
Fosser Special F 0W-30 helps save fuel and reduces CO2 emissions, thus protecting the environment. The additive used in this product has been specially developed for the latest Ford model and meets the stringent requirements of the WSS M2C950-A standard.

Use instructions

Fosser Premium Special F 0W-30 has been developed specifically for use in the new Ford TDCI Duratorq Euro 6 engine (from 2014) with exhaust gas aftertreatment and turbocharger.

Fosser Premium Special F 0W-30 is not backward compatible with older Ford specifications.

  • Specifications: ACEA C2
  • Recommendations*: Ford WSS-M2C950-A, Jaguar/Land Rover STJLR.03.5007, Fiat 9.55535-GS1/DS1
TYPICAL VALUESMETHODUNITFOSSER Premium
Special F 0W-30
Density at 15°CDIN 51 757kg/m3843
Viscosity at 40°CDIN 51 562mm2/s51,7
Viscosity at 100°CDIN 51 562mm2/s9,9
Viscosity index (VI)DIN ISO 2909–182
COC flash pointDIN ISO 2592°C224
Pour pointDIN ISO 3016°C-48
TBNDIN ISO 3771mg KOH/g7,5

The stated values may vary within the usual commercial range.
* meets the requirements of the OEM manufacturer.

FOSSER Premium VOL 0W-30

Written by Alexander Anselm on .

Synthetic high-performance low-friction engine oil for Volvo passenger car engines

Properties

Fosser Premium VOL 0W-30 is a synthetic high-performance low-friction oil. Its low HTHS viscosity helps reduce fuel consumption during the cold start phase and in short-distance travel. Guarantees optimum wear protection and great engine cleanliness. The product is recommended for use in Volvo passenger cars with modern, high-efficiency Euro 4, 5 or 6 engines, with or without turbocharger, direct injection, multi-valve or hybrid technology.
Fosser Premium VOL 0W-30 helps save fuel and reduces CO2 emissions, thus protecting the environment.

Use instructions

Fosser Premium VOL 0W-30 is recommended for modern gasoline and diesel engines with the specification VOLVO VCC 95200377.

  • Specifications: API SL, ACEA A5/ B5
  • Recommendation*: Volvo VCC 95200377
TYPICAL VALUESMETHODUNITFOSSER
Premium VOL 0W-30
Density at 15°CDIN 51 757kg/cm³845
Viscosity at 40°CDIN 51 562mm²/s52,5
Viscosity at 100°CDIN 51 562mm²/s9.89
Viscosity index (VI)DIN ISO 2909–178
Viscosity at -35°CDIN 51 377mPa.s5930
COC flash pointDIN ISO 2592°C224
Pour pointDIN ISO 3016°C-42

The stated values may vary within the usual commercial range.
* meets the requirements of the OEM manufacturer.

FOSSER | Engine Oil from Germany

Find us

Duran Lubricants & Chemicals GmbH
Rodderheide 3-7
33824 Werther (Westf.)
Germany

Let's talk

Explore

© FOSSER. All rights reserved.

Cookie-Einstellungen