Skip to main content

Product Category: Products

FOSSER Antifreeze FA 048

Written by Lukas Vladi on .

Premium radiator anti-freeze

Properties

FOSSER Antifreeze FA 048 is a radiator corrosion inhibitor and anti-freeze agent based on ethylene glycol. It is free of any potentially hazardous substances such as nitrites, amines and phosphates. Due to an optimal combination of inhibitors based on the carboxyl technology as well as silicates and borates (hybrid coolant). FOSSER Antifreeze FA 048 assures efficient and long lasting protection from corrosion for an extended coolant service life. Further additives prevent foaming of the coolant liquid, provide correct cavitation protection and prevent deposits. FOSSER Antifreeze FA 048 offers a year round, maintenance-free anti-freeze and over-heating protection due to an higher boiling point. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

Use instructions

FOSSER Antifreeze FA 048 – mixed with the correct amount of water – can be used without restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these metals, and radiator systems made in aluminium or copper alloys. We recommend maintaining  a concentration of 50% (v/v) during all seasons.
Caution: Observe manufacturer instructions.

  • Specifications: ASTM D 3306/ 4985/ 6210, SAE J 1034, BS6580 (2010), AFNOR NF R15-601, JIS K2234
  • Recommendations*: VW TL 774 C, MTU MTL 5048, Deutz DQC CA-14, BMW GS 9400, MB 325.0, MAN 324 Typ NF, GM B 040 0240, GM Europe L1301, Chrysler MS7170
FOSSER Antifreeze FA 048Proportion of waterFrost resistance until:
12-18 °C
11,5-24 °C
11-36 °C
TYPICAL VALUESMETHODUNITFOSSER Antifreeze FA 048
Density at 20°CDIN 51 757g/cm³1,123
Reserve alkalinity (pH 5.5)ASTM D 1121ml 0,1 n HCI15
Boiling pointASTM D 1120°C170
pHASTM D 1287–8.0
COC flash pointDIN EN ISO 2592°C>120
Frost protection at 50% (v/v) ASTM D 1177  °C-36
Colour  Blue-green

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER FA 11 Ready Mix -30°C Yellow, Blue, Green

Written by Lukas Vladi on .

Radiator anti-freeze, blue/ yellow/ green

Properties

FOSSER FA 11 Ready Mix -30°C is an economical corrosion inhibitor and anti-freeze agent concentrate for radiators in water-cooled vehicles. The product is free of nitrite, amines and phosphates. FOSSER FA 11 Ready Mix -30°C provides excellent frost and corrosion protection all year round. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

Use instructions

FOSSER FA 11 Ready Mix -30°C is ready-to-use radiator anteefreez that can be used without any restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these two metals, and radiator systems made in aluminium or copper alloys.
Observe manufacturer instructions!

  • Specifications: ASTM D 3306, SAE J 1034
  • Recommendations*: MB-325.2, MAN 324 NF, VW TL 774 C, MTU, BMW, Opel-GM, Deutz/ MWM, Ford/ Jaguar
TYPICAL VALUESMETHODUNITFOSSER FA 11 Ready Mix -30°C
Density at 20°CDIN 51 757g/cm31.120
Reserve alkalinity (pH 5.5)ASTM D 1121ml 0.1 n HCl11
Boiling pointASTM D 1120°C>163
pHASTM D 1287–7
COC flash pointDIN 51 758°C>120
Frost protection at 50% (v/v) ASTM D 1177°C-36
Colour––Yellow, Blue, Green

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER FA 12 Ready Mix -30°C

Written by Lukas Vladi on .

Radiator anti-freeze, red

Properties

FOSSER FA 12 Ready Mix -30°C is a radiator corrosion inhibitor and anti-freeze agent based on ethylene glycol. It is free of any potentially hazardous substances such as nitrites, amines and phosphates. Thanks to the optimised combination of highly stable inhibitors based on silicate-free carboxylic acid technology, FOSSER FA 12 Ready Mix -30°C offers excellent protection against corrosion and cavitation and prolongs the coolant change interval. Other additives prevent deposits and foaming of the coolant. FOSSER FA 12 Ready Mix -30°C offers year-round protection against frost and corrosion during the entire service life of the engine. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

Use instructions

FOSSER FA 12 Ready Mix -30°C is ready-to-use radiator antifreeze that can be used without any restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these two metals, and radiator systems made in aluminium or copper alloys. FOSSER FA 12 Ready Mix -30°C is particularly recommended for light-alloy engines where the aluminium must be protected against the effect of increased temperatures. We recommend maintaining a concentration of 50% (v/v) during all seasons. FOSSER FA 12 Ready Mix -30°C can be mixed with most coolants based on ethylene glycol.
Observe manufacturer instructions!

Recommendations*: MB 325.3, MAN 324 SNF, VW TL 774 D, Ford WSS-M97B44-D, Opel GM 6277M, Opel GM 3420, MTU MTL 5048, John Deere JDM H5, Audi/ Seat/ Skoda TL 774-D/F (FA 12/12+), Renault Trucks 41-01-001/-S Type D, Fiat MAT 3624, Jenbacher TA 1000-0201, MAK A4.05.09.01, Mack 014 GS 17009, Cummins IS series u N14/ CES14603/ CES14439, Mazda MEZ MN 121 D, Komatsu 07.892 (2009), Liebherr MD1-36-130, Deutz DQC CB-14, Caterpillar/ MWM 0199-99-02091/11, Case New Holland MAT3624, DAF 74002

TYPICAL VALUESMETHODUNITFOSSER FA 12 Ready Mix -30°C
Density at 20°CDIN 51 757g/cm31,125
Reserve alkalinity (pH 5.5)ASTM D 1121ml 0.1 n HCl28
Boiling pointASTM D 1120°C>163
pHASTM D 1287–8,6
COC flash pointDIN 51 758°C>120
Frost protection at 50% (v/v)ASTM D 1177°C-30
Colour––red

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER Antifreeze FA 040

Written by Lukas Vladi on .

Premium long-life radiator anti-freeze, violet

Properties

FOSSER Antifreeze FA 040 is a premium radiator corrosion inhibitor and anti-freeze agent based on ethylene glycol, with highly effective inhibitors combining OAT and silicate technology as well as high-performance additives (Si-OAT-coolant). It ensures maximum long-term protection of all metal components in the motor. The product does not have any negative effect on coolant hoses or cylinder head gaskets. FOSSER Antifreeze FA 040 is nitrite-, amine-, phosphate- and borate free.

Use instructions

FOSSER Antifreeze FA 040 – mixed with the correct amount of water – can be used without restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these metals, and radiator systems made in aluminium or copper alloys. FOSSER Antifreeze FA 040 is particularly recommended for high-tech engines that require special high-temperature protection for aluminium components. We recommend maintaining a concentration of 50% (v/v) during all seasons. FOSSER Antifreeze FA 040 can be mixed with most coolants based on ethylene glycol.
Caution: Observe manufacturer instructions. Minimum concentration: 33 % (v/v).

  • Specifications: AS 2108-2004, ASTM D 3306, ASTM D 4985, SAE J1034
  • Recommendations*: VW TL 774 G, MB 325.5/ 325.6, MAN 324 type Si-OAT, Audi, Bentley, Bugatti, Lamborghini, Seat/ Skoda, Porsche ab Bj. 1996, Cummins CES 14603, Deutz DQC CC-14
Proportion Fosser FA 040Proportion of waterFrost resistance until:
12-18°C
11,5-24°C
11-36°C
TYPICAL VALUESMETHODUNITFOSSER Antifreeze FA 40
Density at 20°CDIN 51 757g/cm³1,12
Reserve alkalinity (pH 5.5)ASTM D 1121ml 0,1 n HCI9,5
Boiling pointASTM D 1120°C>163
pHASTM D 1287–8,4
COC flash pointDIN EN ISO 2592°C>120
Frost protection at 50% (v/v) ASTM D 1177  °C-36
Colour  violet

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER Premium Multi Longlife 5W-30

Written by Lukas Vladi on .

Synthetic high-performance low-friction engine oil for passenger car engines with or without exhaust gas aftertreatment system

Properties

FOSSER Premium Multi Longlife 5W-30 is synthetic highperformance low-friction oil for petrol and diesel engines in passenger cars. It is a low-SAP product with reduced low-sulphur, ash and phosphorus content. Base oils produced with the latest synthesis technology and carefully chosen innovative highperformance additives help reduce the sulphated ash content and guarantee reliable wear protection and keep the engine clean. Excellent cold start behaviour ensures optimum lubrication during the cold start phase. The product provides reliable protection under extreme conditions and high temperatures.

FOSSER Premium Multi Longlife 5W-30 is recommended for use under all operating conditions and helps protect the environment as it reduces harmful emissions.

Use instruction

FOSSER Premium Multi Longlife 5W-30 has been specially developed for diesel engines with particle filters (DPFs) and is also fully compatible with catalytic converters (CATs) of petrol engines.

FOSSER Premium Multi Longlife 5W-30 prolongs the service life of the exhaust gas aftertreatment system and enhances its performance.

  • Specifications: ACEA C2/C3, API SN
  • Recommendations*: MB 229.51/MB 229.52, BMW Longlife-04,VW-Normen 504.00 /507.00, Opel GM Dexos 2™, Renault RN 0700/0710, Porsche C 30, Fiat 9.55535-S3, Ford WSS-M2C917-A, Haval, Chery, Geely, BYD, Dongfeng, Jac, Lifan
TYPICAL VALUESMETHODUNITFOSSER Premium
Multi Longlife 5W30
Density at 15°CDIN 51 757kg/m³853
Viscosity at 40°CDIN 51 562 mm²/s 71,9
Viscosity at 100°C DIN 51 562 mm²/s 12,1
Viscosity index (VI)DIN ISO 2909–167
Viscosity at -30°CASTM D 5293mPa.s6100
PourpointASTM D 7346°C-39
TBN DIN ISO 3771mg KOH/g8,2
Flash PointDIN 2592°C228°C

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer


FOSSER | Engine Oil from Germany

Find us

Duran Lubricants & Chemicals GmbH
Rodderheide 3-7
33824 Werther (Westf.)
Germany

Let's talk

Explore

© FOSSER. All rights reserved.

Cookie-Einstellungen