High-performance engine oil for low-emission engines
Properties
Fosser Drive Turbo Plus LA 10W-30 is an all-season, high-perfor-mance engine oil for low-emission engines. Exhaust gas turbo-charging and intercooling place significantly higher mechanical and thermal demands on engine oils. These more stringent operating conditions are safely mastered even with extended oil dwell times. A reliable cold start at low external temperatures and full lubricity at high operating temperatures are ensured.
Use instructions
Fosser Drive Turbo Plus LA 10W-30 is used in particular in heavy-du-ty Euro IV, Euro V and Euro VI commercial vehicle engines with exhaust aftertreatment.
In addition, it can be used for commercial vehicle and passenger car diesel
engines with and without charging, as well as in Otto engines (mixed fleet).
Engine oils in this performance category are recommended for extended
oil change intervals.
Specifications: • ACEA E6/E7/E9 • API CK-4/SN
Recommendations*: • Caterpillar ECF-3 / ECF-2 / ECF-1 • Cummins CES 20086 / 20081 • DDC 93K222 / 99K218 • Deutz DQC IV-10LA • Mack EOS-4.5 • MAN M 3477 / 3575 / 3275 • MB 228.51 / MB 228.31 • MTU Type 3.1 • Renault VI RLD-4 • Volvo VDS-4.5 / VDS-4
| TYPICAL VALUES | METHOD | UNIT | FOSSER Drive Turbo Plus LA 10W-30 |
| Density at 15°C | DIN 51 757 | kg/m³ | 855 |
| Viscosity at 40°C | DIN 51 562 | mm²/s | 78,9 |
| Viscosity at 100°C | DIN 51 562 | mm²/s | 12,2 |
| Viscosity index (VI) | DIN ISO 2909 | – | 151 |
| Viscosity at -25°C | ASTM D 5293 | mPa.s | 5070 |
| Pour point | ASTM D 7346 | °C | -39 |
| COC flash point | DIN ISO 2592 | °C | 242 |
| TBN | ASTM D 2896 | mg KOH/g | 9,4 |
