Partially Synthetic Gear Oil
Properties
FOSSER SMT 75W-80 is made of high quality mineral base oils and Synthetic base oils (PAO). In combination with a modern additive mix, a performance level for transmission oils is achieved.
- Excellent high pressure and anti-wear properties
- Good to very good corrosion and rust protection properties
- Low foaming and excellent aging stability
- High viscosity index and low pour point ensure comfortable operation switching even at lower temperatures
- Reduction of fuel consumption
- Extension of the oil change intervals
Use instructions
FOSSER SMT 75W-80 is used for the lubrication of synchronized and non-synchronized gearboxes. It is particularly recommended for commercial vehicles equipped with ZF gearboxes, and are especially suitable for mechanical transmissions and steering systems with re/ intarders.
- Specifications: API GL-4
- Recommendations*: IVECO, Volvo 97307, DAF, ZF TE-ML 01L/ 02L/ 08/ 13/ 18K/ 24A, MAN 341 Typ Z-4, Eaton Extended Drain (300,000 km), Renault (in accordance with Renault note technique B0032/2 Annex 3)
| TYPICAL VALUES | METHOD | UNIT | FOSSER SMT |
| SAE Class | – | 75W-80 | |
| Density at 15°C | DIN 51 757 | kg/m³ | 854 |
| Viscosity at 40°C | DIN 51 562 | mm²/s | 50,4 |
| Viscosity at 100°C | DIN 51 562 | mm²/s | 8,7 |
| Viscosity index (VI) | DIN ISO 2909 | – | 151 |
| Pourpoint | DIN ISO 3016 | °C | -39 |
| Flash point COC | DIN ISO 2592 | °C | 228 |
The stated values may vary within the usual commercial range.
* meets the requirements of the OEM manufacturer.
