Super-longlife radiator anti-freeze, violet
Properties
FOSSER Antifreeze FA 30 is a radiator corrosion inhibitor and anti-freeze agent based on ethylene glycol. It is free of any potentially hazardous substances such as nitrites, amines and phosphates. Thanks to the optimized combination of highly stable inhibitors based on silicate-free carboxylic acid technology, FOSSER Antifreeze FA 30 offers excellent protection against corrosion and cavitation and prolongs the coolant change interval. Other additives prevent deposits and foaming of the coolant. FOSSER Antifreeze FA 30 offers year-round protection against frost and corrosion during the entire service life of the engine. The product does not have any negative effect on coolant hoses or cylinder head gaskets.
Use instructions
FOSSER Antifreeze FA 30 – mixed with the correct amount of water – can be used without any restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminum or a combination of these two metals, and radiator systems made in aluminum or copper alloys. FOSSER Antifreeze FA 30 is particularly recommended for light-alloy engines where the aluminum must be protected against the effect of increased temperatures. We recommend maintaining a concentration of 50% (v/v) during all seasons.
Caution: Observe manufacturer instructions.
Recommendations*: VW TL 774 D/F, MB 325.3, MAN 324 SNF, Audi, Bentley, DAF, Jaguar ab 1999, MINI Cooper D ab 2007, Porsche ab 1996, Seat/ Skoda, VW, Chevrolet, Citroen, Honda, Honda, Hyundai, Jaguar, Kia, Land Rover, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Saab, Suzuki, Toyota
| Proportion Fosser FA 12 | Proportion of water | Frost resistance until: |
| 1 | 2 | -18°C |
| 1 | 1,5 | -24°C |
| 1 | 1 | -36°C |
| TYPICAL VALUES | METHOD | UNIT | FOSSER Antifreeze FA 30 |
| Density at 20°C | DIN 51 757-3 | g/cm³ | 1,12 |
| Reserve alkalinity (pH 5.5) | ASTM D 1121 | ml 0,1 n HCI | 8-11 |
| Boiling point | ASTM D 1120 | °C | >160 |
| pH | ASTM D 1287 | – | 8,6 |
| COC flash point | DIN EN ISO 2592 | °C | >120 |
| Frost protection at 50% (v/v) | ASTM D 1177 | °C | -36 |
| Colour | violet |
The stated values may vary within the usual commercial range.
* meets the requirements of the OEM manufacturer.
