FOSSER Turbo LA 5W-30
HC-Synthetic high-performance low-friction engine oil
Properties
FOSSER Turbo LA 5W-30 is a HC-synthetic high-performance low-friction engine oil for commercial vehicles. The oil is a low-SAPS product with significantly reduced sulphated ash, phosphorus and sulphur content. Thanks to the use of high-performance additives, the oil offers excellent oxidation and high-temperature stability. The good dispersing properties of the product prevent deposits in the engine and on pistons that could otherwise impair the performance of the engine. At very low ambient temperatures, FOSSER Turbo LA 5W-30 guarantees reliable cold start and fast oil supply to all lube points. It is able to cope with all extreme conditions and to reduce friction loss and wear. It also improves the efficiency of engines as both oil and fuel consumption is reduced and the service life of the engine is prolonged.
Use instructions
FOSSER Turbo LA 5W-30 has been developed specifically for the economical destribution of exhaust-optimized engines with exhaust aftertreatment systems. FOSSER Turbo LA 5W-30 can be used all year round and maintains the effectiveness of the exhaust gas purification systems upright over very long operating times.
- Specifications: ACEA E6/E7/E9, API CK-4 / SN, JASO DH 2
- Recommendations*: LKW Euro IV, V, VI, Caterpillar ECF-3, Cummins CES 20086, DAF Extende Drain, DDC 93K222, Deutz DQC IV-10 LA, Mack EOS-4.5, MAN M 3677 / 3477 / 3277 / 3271-1, Iveco, MB 228.51 / 228.31 / 226.9, MTU Type 3.1, Renault VI RLD-3 / RXD / RGD, Scania LDF-4, Voith Retarder Class B, Volvo VDS-4.5, Detroit Diesel DDC 93K218
TYPICAL VALUES | METHOD | UNIT | FOSSER Turbo LA 5W-30 |
Density at 15°C | ASTM D4052 | kg/m³ | 856 |
Viscosity at 40°C | ASTM D7042 | mm²/s | 69 |
Viscosity at 100°C | ASTM D7042 | mm²/s | 12 |
Viscosity index (VI) | ASTM D2270 | – | >145 |
Viscosity at -30°C | ASTM D5293 | cP | 6600 |
Pour point | ASTM D97 | °C | -36 |
COC flash point | ASTM D92 | °C | >218 |
TBN | ASTM D2896 | mg KOH/g | 10.1 |
sulfated ash | ASTM D874 | %Wt | 0.8 |
The stated values may vary within the usual commercial range.
* meets the requirements of the OEM manufacturer.