Skip to main content

Archiv: Produkte

FOSSER Race 4T 10W-40

Geschrieben von Lukas Vladi am .

Semi-synthetic High-Performance Engine Oil for Four-Stroke Motorbike Engines

Properties

  • High wear protection
  • Excellent shear stability
  • Optimised friction properties
  • Outstanding low-temperature behaviour
  • Unrivalled detergent/dispersing properties
  • Also suitable for wet clutches
  • Effective rust and corrosion protection
  • Designed for maximum engine protection

Use instructions

FOSSER Race 4T 10W-40 is particularly recommended for the lubrication of high-powered four-stroke motorbike engines, especially engines that are operated under extreme operating conditions.
Observe manufacturer instructions.

Specifications: API SN, JASO MA2

Recommendations: Aprilla, BMW, Ducati, Hondo, Kawasaki, Moto-Guzzi, Suzuki, Trimph, Yamaha

TYPICAL VALUESMETHODUNITFOSSER Race 4T 10W-40
Density at 15°CDIN 51 757kg/cm³875
Viscosity at 40°CDIN EN ISO 3104mm²/s102
Viscosity at 100°CDIN EN ISO 3104mm²/s14,4
Viscosity index (VI)DIN ISO 2909–145
Pour point DIN ISO 3016°C-36
COC flash pointDIN EN ISO 2719°C220
TBNDIN ISO 3771mgKOH/g7,5

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER Race 4t 20w50

FOSSER Race 4T 20W-50

Geschrieben von Lukas Vladi am .

Mineral High-Performance Engine Oil for Four-Stroke Motorbike Engines

Properties

  • High wear protection
  • Excellent shear stability
  • Optimised friction properties
  • Unrivalled detergent/dispersing properties
  • Also suitable for wet clutches
  • Effective rust and corrosion protection
  • Designed for maximum engine protection

Use instructions

FOSSER Race 4T 20W-50 is particularly recommended for the lubrication of high-powered four-stroke motorbike engines, especially engines that are operated under extreme operating conditions.
Observe manufacturer instructions.

Specifications: API SN, JASO MA/ MA2

TYPICAL VALUESMETHODUNITFOSSER Race 4T 20W-50
Density at 15°CDIN 51 757kg/m³883
Viscosity at 40°CDIN 51 562mm²/s175
Viscosity at 100°CDIN 51 562mm²/s19,5
Viscosity index (VI)DIN ISO 2909–128
Pour point DIN ISO 3016°C-21
COC flash pointDIN ISO 2592°C>195
Base numberDIN ISO 3771mg KOH/g7,5

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER ATF A

FOSSER ATF A

Geschrieben von Lukas Vladi am .

Automatic Transmission Fluid

Properties

  • High viscosity index
  • High load capacity, outstanding wear minimization
  • Low pour point
  • No foaming
  • High thermal stability
  • Reliable friction coefficient characteristic
  • Excellent viscosity-temperature behavior
  • Good oxidation stability
  • No adverse effect on standard sealing materials

Use instructions

  • Automatic motor vehicle transmissions and torque converters
  • Manual transmissions for which an ATF product is prescribed
  • Hydrostatic transmissions
  • Power steering systems
  • Hydraulic systems
  • Observe manufacturer instructions!

Recommendations*: General Motors ATF Type A Suffix A, MB 236.2, Volvo 97325, MAN 339 A, Renk Doromat, CAT TO-2, Allison C-4

TYPICAL VALUESMETHODUNITFOSSER ATF A
Density at 15°CDIN 51 757kg/m³854
Viscosity at 40°CDIN 51 562mm²/s37,8
Viscosity at 100°CDIN 51 562mm²/s8,2
Viscosity index (VI)DIN ISO 2909–200
COC flash pointDIN ISO 3016°C-45
Pour pointDIN ISO 2592  °C219
Colour––red

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER Dexron d2

FOSSER Dexron D II

Geschrieben von Lukas Vladi am .

Automatic Transmission Fluid

Properties

  • High viscosity index
  • High load capacity, outstanding wear minimisation
  • Low pour point
  • No foaming
  • High thermal stability
  • Reliable friction coefficient characteristic
  • Unrivalled viscosity-temperature behaviour
  • Excellent oxidation stability
  • No adverse effect on standard sealing materials

Use instructions

  • Automatic motor vehicle transmissions and torque converters
  • Manual transmissions for which ATF is prescribed
  • Hydrostatic transmissions
  • Power steering systems
  • Hydraulic systems

Observe manufacturer instructions!

Recommendations*: General Motors Dexron II D, DTFR 13C100 (236.1), MAN 339 Typ Z-1 / V-1, Allison C-4, CAT TO-2, Renk Doromat, Voith Liste 55.6335.32, ZF TE-ML 03D/04D/11A/14A/17C

TYPICAL VALUESMETHODUNITFOSSER Dexron D II
Density at 15°CDIN 51 757kg/m³851
Viscosity at 40°CDIN ISO 3104mm²/s37
Viscosity at 100°CDIN ISO 3104mm²/s7,937
Viscosity index (VI)DIN ISO 2909–195
Pour point DIN ISO 3016°C-45
COC flash pointDIN ISO 2592°C218
Colour ––red

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER Dexron d3-h

FOSSER Dexron® DIII-H (Natural, Red)

Geschrieben von Lukas Vladi am .

Automatic Transmission Fluid

Properties

  • Extremely high viscosity index
  • High load capacity, outstanding wear minimisation
  • Low pour point
  • No foaming
  • High thermal stability
  • Safe friction coefficient characteristic
  • Excellent viscosity-temperature behaviour
  • Outstanding oxidation stability
  • No effect on conventional sealing materials

Use instructions

  • Automatic motor vehicle transmissions and torque converters
  • Hydrostatic transmissions
  • Power steering systems
  • Hydraulic systems
  • Observe manufacturer instructions!

Recommendations*: GM Dexron III-H, Allison C-4, Allison TES-389, BMW 83 22 9 407 807, BMW 83 22 9 407 858, Caterpillar TO-2, DTFR 13C100 (236.1), DTFR 13C120 (236.2), DTFR 13C140 (236.7), DTFR 13C170 (236.9), Ford Mercon®, Ford WSS-M2C138-CJ, Ford ESP-M2C166-H, MB 236.10, MB 236.6, MAN 339 Typ L1/V1/V2/Z1/Z2, VOITH H 55.6335, VOITH H 55.6335.3X Extended Drain (G1363), VOLVO 1161521, VOLVO 1161621, VOLVO 97340, VOLVO 97341, VW G 052 162 (TL 52 162), ZF TE-ML 09A/14A/09B/11B/17C/03D/04D/02F

TYPICAL VALUESMETHODUNITFOSSER Dexron DIII-H
Density at 15°CDIN 51 757kg/m³848
Viscosity at 40°CDIN 51 562mm²/s35
Viscosity at 100°CDIN 51 562mm²/s7,2
Viscosity index (VI)DIN ISO 2909–176
Pour pointDIN ISO 3016°C-54
COC flash pointDIN ISO 2592°C214
Colour––red

* meets the requirements of the OEM manufacturer.
The stated values may vary within the usual commercial range.

FOSSER | Motorenöl aus Deutschland

Hauptsitz

Duran Lubricants & Chemicals GmbH
Rodderheide 3-7
33824 Werther (Westf.)
Deutschland

Kontakt

Fosser

© FOSSER. Alle Rechte vorbehalten.
Cookie-Einstellungen